ASIC Driver Commands on Cisco IOS XR Software

show controllers egressq queue

show controllers egressq queue

To display information about a specific egress queue, or a range of egress queues, use the show controllers egressq queue command in EXEC mode.

show controllers egressq queue {queue1 [queue2 from-group {group-idall} from-interface {type instance all} from-port {port-idall} limits {max min} all] location node-id

Syntax Description

 

queue1

Identifies the first port whose egress queue information you want to display.

 

 

 

Replace queue1 with a queue identifier. Range is from 1 through 8191.

 

 

 

 

 

 

queue2

(Optional) Identifies the last port whose egress queue information you want

 

 

 

to display. Replace queue2 with a queue identifier. Range is from 1 through

 

 

 

8191.

 

 

 

 

 

 

from-group group-id

Displays egress queue information for a specific port group. Replace

 

 

 

group-idwith the number that identifies the port group whose information to

 

 

 

display. Range is from 1 through 2047.

 

 

 

 

 

 

from-group all

Displays egress queue information for all port groups on the specified

 

 

 

location.

 

 

 

 

 

 

from-interface type

Displays egress queue information for a specific interface. Replace type

 

 

instance

instance with a physical interface ID or a virtual interface ID.

 

 

 

Note Use the show interfaces command to see a list of all possible

 

 

 

interfaces currently configured on the router.

 

 

 

 

 

 

from-interface all

Displays egress queue information for all interfaces on the specified

 

 

 

location.

 

 

 

 

 

 

from-port port-id

Displays egress queue information for a specific port. Replace port-idwith

 

 

 

a port ID. Range is from 0 through 1023.

 

 

 

 

 

 

from-port all

Displays egress queue information for all ports on the specified location.

 

 

 

 

 

 

limits max

Displays the maximum limits table.

 

 

 

 

 

 

limits min

Displays the minimum limits table.

 

 

 

 

 

 

all

Displays detailed information about all egress queues on the specified

 

 

 

location.

 

 

 

 

 

 

location node-id

Identifies the location of the node whose egress queue information you want

 

 

 

to display. The node-idis expressed in the rack/slot/module notation.

 

 

 

 

 

 

 

Defaults

 

No default behavior or values

 

 

 

 

Command Modes

 

EXEC

 

 

 

Cisco IOS XR Advanced System Command Reference

 

 

 

 

 

 

 

OL-14340-01

 

 

AR-73

 

 

 

 

 

Page 73
Image 73
Cisco Systems OL-14340-01 manual Show controllers egressq queue, AR-73