ASIC Driver Commands on Cisco IOS XR Software
show controllers pse summary
AR-117
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers pse summary
To display a summary of packet switching engine (PSE) information for a specific controller or node,
use the show controllers pse summary command in EXEC mode.
show controllers pse summary [egress | ingress] [location node-id]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
egress (Optional) Displays information for the egress PSE device
only.
Note Follow the egress argument with the location node-id
argument to restrict the command to a specific node.
ingress (Optional) Displays information for the ingress PSE device
only.
Note Follow the ingress argument with the location
node-id argument to restrict the command to a
specific node.
location node-id (Optional) Identifies the location of the node whose PSE
device information you want to display. The node-id is
expressed in the rack/slot/module notation.
Note Use the show platform command to see the location
of all nodes installed in the router.
Note Include the instance {0 | 1} argument before the
location node-id argum en t to res tri ct the command to
a specific device instance on the specified node.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 No modification.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 The were instance {0 | 1} keywords were replace by the egress and ingress
keywords.
Release 3.6.0 No modification.