ASIC Driver Commands on Cisco IOS XR Software
show controllers egressq statistics
AR-76
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers egressq statistics
To display egress queue manager statistics, use the show controllers egressq statistics command in
EXEC mode.
show controllers egressq statistics location node-id
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
Examples The following example shows how to display egress queue manager statistics:
RP/0/RP0/CPU0:router# show controllers egressq statistics location 0/2/CPU0
--------------------------------------------------
Egressq Statistics
--------------------------------------------------
egressq ASIC version: 1
egressq ASIC state: Normal
plimasic link0 output packets: 0
plimasic link0 output bytes: 0
plimasic link1 output packets: 0
plimasic link1 output bytes: 0
location node-id Identifies the location of the egress queue whose statistics you want to
display. The node-id is expressed in the rack/slot/module notation.
Release Modification
Release 3.2 This command was introduced on the Cisco CRS-1.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 No modification.
Task ID Operations
drivers read
interface read