Cisco Systems OL-14340-01 Show controllers pse statistics, Optional Displays all counters, AR-111

ASIC Driver Commands on Cisco IOS XR Software

show controllers pse statistics

show controllers pse statistics

To display packet switching engine (PSE) statistics for a specific controller instance, or for a specific node, use the show controllers pse statistics command in EXEC mode.

show controllers pse statistics [all] [egress ingress] [location node-id]

Syntax Description	all	(Optional) Displays all counters.
	egress	(Optional) Displays statistics for the egress PSE device only.
		Note Follow the egress argument with the location node-id
		argument to restrict the command to a specific node.
	ingress	(Optional) Displays statistics for the ingress PSE device only.
		Note Follow the ingress argument with the location
		node-idargument to restrict the command to a
		specific node.
	location node-id	(Optional) Identifies the location of the node whose PSE
		device information you want to display. The node-idis
		expressed in the rack/slot/module notation.
		Note Use the show platform command to see the location
		of all nodes installed in the router.
		Note Include the egress or ingress keyword before the
		location node-idargument to restrict the command to
		a specific device instance on the specified node.

Defaults

Command Modes

Command History

If you do not specify the egress or ingress and location node-idkeyword arguments, the show controllers pse statistics command displays statistical information for both device instances on all modular services cards.

EXEC

Release	Modification
Release 2.0	This command was introduced on the Cisco CRS-1.
Release 3.0	No modification.
Release 3.2	No modification.
Release 3.3.0	No modification.
Release 3.4.0	No modification.
Release 3.5.0	The were instance {0 1} keywords were replace by the egress and ingress
	keywords.
Release 3.6.0	The all keyword was changed from required to optional.

	Cisco IOS XR Advanced System Command Reference
OL-14340-01		AR-111