Document History, REV ECN no | Cypress CY7C65113C guide

CY7C65113C

Document History Page

Document Title: CY7C65113C USB Hub with Microcontroller

Document Number: 38-08002

REV.	ECN NO.	Issue Date	Orig. of	Description of Change
REV.	ECN NO.	Issue Date	Change	Description of Change

**	109965	02/22/02	SZV	Change from Spec number: 38-00590 to 38-08002

*A	120372	12/17/02	MON	Added register bit definitions.
				Added default bit state of each register.
				Corrected the Schematic (location of the pull-up on D+).
				Corrected the Logical Diagram (removed the extra GPIO Port 1).
				Added register summary.
				Modified Figure 17-5, more labeling.
				Removed information on the availability of the part in PDIP package.
				Modified Table 18-1and provided more explanation regarding
				locking/unlocking mechanism of the mode register.
				Removed any information regarding the speed detect bit in Hub Port Speed
				register being set by hardware.
*B	124522	03/13/03	MON	Fixed the figure on page 42 regarding the update of mode registers. The
				arrows in the figure were misplaced and the figure was unreadable. This is
				an important figure for understanding mode register functioning.
*C	368601	See ECN	BHA	Added Lead-free Package Information.
				Removed CY7C65013 Information.
				Updated Package Drawing.
*D	429098	See ECN	TYJ	Part numbers changed to ‘C’ types
				Cypress Perform logo added
				Part numbers updated in the ordering section

Document #: 38-08002 Rev. *D

Page 49 of 49

[+] Feedback

Image 49

Cypress CY7C65113C manual Document History, REV ECN no, Issue Date Orig. Description of Change

Contents

Cypress Semiconductor Corporation USB Hub with Microcontroller CY7C65113C 17.0 16.018.0 19.0 List of Tables Features Gpio Functional OverviewI2C USB Logic Block Diagram Product Summary Tables Pin ConfigurationsPin Assignments Top View CY7C65113C 28-pin Soic I/O Register Summary Instruction Set Summary Instruction Set SummaryMnemonic Operand Opcode Cycles 14-bit Program Counter Programming Model KB -32 Prom ends here CY7C65113C Program Memory begins here 8-bit Temporary Register 8-bit Accumulator a8-bit Program Stack Pointer PSP Address Modes 8-bit Data Stack Pointer DSPMOV A, Dspinit Clocking Power-on ResetXtalout Xtalin Watchdog Reset Suspend Mode Port 0,1 Low Isink General-purpose I/O PortsPort 0 Data Address Gpio Configuration Address Gpio Configuration Port Gpio Interrupt Enable Ports 10.0 12-bit Free-Running TimerPort 0 Interrupt Enable Timer LSB Address 11.0 I2C Configuration RegisterTimer MSB Address 2C Configuration Address I2C Data Address 12.0 I2C-compatible Controller2C Status and Control Address ACK Continue/Busy Write 1 to indicate ready for next transaction Processor Status and Control Address 0xFF Processor Status and Control RegisterIRQ USB Endpoint Interrupt Enable Address Global Interrupt Enable Register AddressInterrupts Interrupt Vectors Interrupt Controller Function Diagram Timer Interrupt USB Bus Reset InterruptInterrupt Latency USB Hub Interrupt USB Endpoint InterruptsGpio Interrupt 14.8 I2C Interrupt USB Serial Interface Engine SIE USB OverviewUSB Enumeration ACK/NAK/STALL USB Hub Connecting/Disconnecting a USB DeviceHub Ports Connect Status Hub Ports Enable Register Hub Ports Enable Register AddressEnabling/Disabling a USB Device Hub Downstream Ports Status and Control Hub Ports Force Low Hub Downstream Ports Control Register Address 0x4BHub Ports SE0 Status Address 0x4F Hub Ports Data Downstream Port Suspend and ResumeHub Ports Data Register Hub Ports Suspend Address 0x4D Hub Ports Resume Address 0x4E USB Upstream Port Status and ControlUSB Status and Control Address 0x1F USB Device Addresses USB Serial Interface Engine OperationUSB Device Endpoints USB Device Address Device A, B Addresses 0x10A and 0x40B USB Device Endpoint Zero Mode A0, B0 USB Control Endpoint Mode RegistersSize Label Start Address USB Non-control Device Endpoint Mode USB Non-control Endpoint Mode RegistersUSB Endpoint Counter Registers Stall Setup Endpoint Mode/Count Registers Update and Locking MechanismUpdate Data Update only if Fifo is WrittenSet Data Set Setup OUT USB Mode Tables Dtog Dval Count Dtog Dval Count Endpoint Ports Register Summary LOW Absolute Maximum Ratings Sample Schematic Parameter Description Conditions Min Max Unit General Electrical CharacteristicsUSB Interface Upstream/Downstream Port USB Full-speed Signaling10 Switching Characteristics fOSC = 6.0 MHzTimer Signals Parameter Description Min Max Unit Clock Source Ordering Information Package DiagramOrdering Code Prom Size Package Type Operating Range CY7C65113C-SXCT Document History Issue Date Orig. Description of ChangeREV ECN no