Dell - page 280

280 Configuring System Information
Figure 6-129. ISDP Global Configuration
The ISDP Global Configuration page contain the following fields:
• ISDP Mode — Use this field to enable or disable the Industry Standard Discovery Protocol on the
switch.
•
ISDP V2 Mode — Use this field to enable or disable the Industry Standard Discovery Protocol v2 on
the switch.
•
Message Interval — Specifies the ISDP transmit interval. The range is (5–254). Default value is 30
seconds.
•
Hold Time Interval — The receiving device holds ISDP message during this time period. The range is
(10–255). Default value is 180 seconds.
•
Neighbors Table Last Time Changed — Indicates when the Neighbors table entry was last modified.
•
Device ID — The Device ID advertised by this device. The format of this Device ID is characterized
by the value of Device ID Format object.
•
Device ID Format Capability — Indicates the Device ID format capability of the device.
–
serialNumber — Indicates that the device uses serial number as the format for its Device ID.
–
macAddress — Indicates that the device uses layer 2 MAC address as the format for its Device ID.
–
other — Indicates that the device uses its platform specific format as the fo rmat for its Device ID.
•
Device ID Format — Indicates the Device ID format of the device.
–
serialNumber — Indicates that the value is in the form of an ASCII string containing the device
serial number.
–
macAddress — Indicates that the value is in the form of Layer 2 MAC address.