Configuring Switching Information 359
Displaying the MSTP Interface Settings Table
1.
Open the
MSTP Settings
page.
2.
Click
Show All
.
The
MSTP Interface Table
displays.
Figure 7-48. MSTP Interface Table
3.
Use the
Unit
drop-down menu to view the
MSTP Interface Table
for other units in the stack, if they
exist.
4.
To modify the port priority or path cost for one or more interfaces, check
Edit
for the desired
interfaces.
5.
Make the needed changes to the values in the
Port Priority
or
Path C ost
columns.
6.
Click Apply Changes.
The fields are modified for the selected Interfaces, and the device is updated.
Defining MSTP Interfaces Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• Spanning Tree Commands
Configuring MST Port Settings Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• Spanning Tree Commands
The following table summarizes the equivalent CLI commands for this feature.