Configuring IPv6 631
•
Prefer Lifetime
— Specifies the prefer lifetime in seconds for delegated prefix.
•
Delete
— Deletes the displayed pool prefix delegation configuration when checked and
Apply
Changes
is clicked.
Configuring a delegated prefix to a Pool
1.
Open the
Prefix Delegation Configuration
page.
2.
Select the pool to be configured.
3.
Specify the delegated prefix.
4.
Modify the remaining fields as needed.
5.
Click
Apply Changes
.
The delegated prefix and parameters are saved, and the device is updated.
Configuring a delegated prefix Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCPv6 Pool Summary
Use the Pool Summary
page to display settings for all DHCPv6 Pools. At least one pool must be created
using DHCPv6 Pool Configuration before the Pool Summary displays.
To display the page, click IPv6
→
DHCPv6
→
Pool Su mmary in the tree view.
Table 10-8. DHCPv6 Prefix Delegation Command
CLI Command Description
prefix-delegation Defines Multiple IPv6 prefixes within a pool for distributing to specific
DHCPv6 Prefix delegation clients.