Configuring Switching Information 299
Figure 7-5. Port Security Table
3.
Use the
Unit
drop-down menu to view the
Port Se curi ty Tab le
for other units in the stack, if they exist.
Defining Multiple Locked Ports
1.
Open the
Port Security
page.
2.
Click
Show All.
The
Port Se curi ty Tabl e
displays.
3.
Click
Edit
for each port whose parameters are to be changed.
4.
Fields can now be edited as needed for these ports.
5.
Click
Apply Changes
.
The changes are made to the Port Security table, and the device is updated.
Configuring Port Security with CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• Address Table Commands
The following table summarizes the equivalent CLI commands you use to configure port security.
Table 7-3. Port Security Commands
CLI Command Description
port security (no port security) Disables the learning of new addresses on an interface. To enable new
address learning, use the no form of the port security command.
port security max Configures the maximum addresses that can be learned on the port
while the port is in port security mode.
show ports security Displays the port-lock status.