Configuring Switching Information 331
Modifying Broadcast Control
1.
Open the
Storm Control
interface.
2.
Click
Show All
.
The
Storm Control Settings Table
displays.
3.
Check
Edit
for each port that
Broadcast Control
is to be modified.
4.
Edit
Broadcast Control
as needed.
5.
Click
Apply Changes
.
The storm control port parameters are saved to the switch.
Configuring Storm Control with CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• Ethernet Configuration Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-15. Storm Control Commands
CLI Command Description
storm-control broadcast Enables broadcast storm recovery mode for a specific interface.
storm-control multicast Enables multicast storm recovery mode for an interface.
storm-control unicast Enables unknown unicast storm control for an interface.
show storm-control Display the configuration of storm control.