Dell LAG Membership

388 ConfiguringSwitching Information
Modifying LACP Parameters for Multiple Ports
1. Open the LACP Parameters page.
2. Click Show All .
The
LACP Parameters Table displays.
3. Click Edit for each Port to modify.
4. Edit the fields as needed.
5. Click Apply Changes .
The LACP Parameter settings are modified, and the device is updated.
Configuring LACP Parameters Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide :
• LACP Commands
The following table summarizes the equivalent CLI commands for this feature.
LAG Membership
Your switch supports 48 LAGs per system, and eight ports per LAG. Use the LAG Membership page to
assign ports to LAGs and LACPs.
To di sp la y t he LAG Membership page, c lick Switching
→ Link Aggregation → LAG Membership in the
tree view.
Table 7-34. LACP Commands
CLI Command Description
lacp port-priority Configures the priority value for physical ports.
lacp system-priority Configures the system LACP priority.
lacp timeout Ass igns an administrative LACP timeout.
show lacp ethernet Displays LACP information for Ethernet ports.
show lacp port-channel Displays LACP information for a port-channel.