Configuring Switching Information 295
Changing Administrative Port Control
1.
Open the
Dot1x Authentication
page.
2.
Click
Show All
.
The
Dot1x Authentication
Tabl e
displays.
3.
Scroll to the right side of the table and select the
Edit
check box for each port to configure. Change
Admin Port Control
to
Authorized
,
Unauthorized
, or
Automode
as needed for chosen ports. Only
MAC-Based
and
Automode
actually uses dot1x to authenticate.
Authorized
and
Unauthorized
are
manual overrides.
4.
Click
Apply Changes
.
Admin Port Control is updated for the specified ports, and the device is updated.
Enabling Dot1x Authentication Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• 802.1X Commands
The following table summarizes the equivalent CLI commands you use to enable dot1x authentication.