Configuring System Information 257
Figure 6-115. Stack Port Counters
The Stack Port Counters page contains the following fields:
•
Unit —
Indicates the subordinate switch being viewed.
•
Interface —
Indicates the name of the interface.
•
Data Rate (Mb/s) —
Indicates the speed at which the data is transmitted.
•
Transmit Error Rate (Errors/sec) —
Indicates the number of errors transmitted per second.
•
Total Errors —
Total number of errors transmitted.
•
Data Rate (Mb/s) —
Indicates the speed at which the data is received.
•
Receive Error Rate (Errors/sec) —
Indicates the number of errors received per second.
•
Total Errors —
Total number of errors received.
Viewing Stack Port Counters
1.
Open the
Stack Port Counters
page.
Viewing Stack Port Counters Using CLI Commands
For information about the CLI commands that perform thi s function, see the
System Management
Commands
chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI
commands you use to view Stack Port Counters information.
Table 6-56. Stack Port Counters Command
CLI Command Description
show stack-port counters Displays summary data counter information for all interfaces.