148 Configuring System Information
3. Select a
Host Name Mapping Table
entry.
4.
Check the
Remove
check box.
5.
Click
Apply Changes
.
The Host Name Mapping Table entry is removed, and the device is updated.
Mapping an IP Address to Domain Host Names Using CLI Commands
For information about the CLI commands that perform thi s function, see the
IP Addressing Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you
use.
Dynamic Host Name Mapping
Use the Dynamic Host Name Mapping page to view dynamic host entries the switch has learned.
To di sp la y t he Dy namic Host Name Mapping page, click System
→
IP Addressing
→
Dynamic Host
Name Mapping in the tree view.
Figure 6-28. Dynamic Host Name Mapping
The Dynamic Host Name Mapping page contains the following fields:
•
Host Name
— Contains a list of host names.
•
Tota l Ti me —
Total time of the dynamic entry.
•
Elapsed Time —
Elapsed time of the dynamic entry.
•
Address —
IP address of dynamic entry.
•
Remove
— Select the entry to remove from the table, and then click
Apply Changes
to remove the
selected entry from the Host Name IP Mapping list.
Table 6-17. Host Name Mapping Command
CLI Command Description
ip host Use to configure static host name-to-address mapping in the host
cache.