Viewing Statistics and Remote Monitoring 495
Displaying the Alarm Table
1.
Open the
RMON Alarms
page.
2.
Click
Show All.
The left side of the
RMON Alarms Table
displays.
Figure 8-18. RMON Alarms Table
3.
Click the right arrow at the bottom of the screen to view the right side of the table.
Removing One Alarm Table Entry
1.
Open the
RMON Alarms
page.
2.
Select an entry in the
Alarm Entry
drop-down menu.
3.
Check the
Remove
check box and click
Apply Changes
.
The entry is removed, and the device is updated.
Removing Multiple Alarm Table Entries
1.
Open the
RMON Alarms
page.
2.
Click
Show All.
The
RMON Alarms Table
displays.
3.
Check
Remove
for each Alarm Entry to remove.
4.
Click
Apply Changes
.
The entries are removed, and the device is updated.
Defining Switch Alarms Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• RMON Commands
The following table summarizes the equivalent CLI commands for this feature.