526 Configuring Routing
Defining an OSPF Area Range
1.
Open the
OSPF Area Range Configuration
page.
2.
Enter Area ID, IP Address, Subnet Mask, LSDB Type and Advertisement.
3.
Click the
Add
check box.
4.
Click
Apply Changes
.
The OSPF area range is defined and configured. All configured OSPF area ranges are displayed in the
table on the
OSPF Area Range Configuration
page.
Removing an OSPF Area Range Configuration
1.
Open the
OSPF Area Range Configuration
page.
2.
Select the
Remove
check box in the row of the
Area ID
to be deleted.
3.
Click
Apply Changes
.
The address range is removed from the area configuration.
OSPF Area Range Configuration CLI Command
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-9. OSPF Area Range Configuration Commands
CLI Command Description
area range Creates a specified area range for a specified NSSA.