Configuring Switching Information 387
Global Parameters
•
LACP System Priority (1–65535)
— Indicates the LACP priority value for global settings. The default
value is 1.
Port Parameters
•
Interface
— Specifies the unit and port number to which timeout and priority values are assigned.
•
LACP Port Priority (1–65535)
— Specifies LACP priority value for the specified port. The default
value is 1.
•
LACP Timeout
— Specifies Administrative LACP timeout. Possible values are:
–
Short
— Specifies a short timeout value.
–
Long
— Specifies a long timeout value. This is the default.
Defining Link Aggregation Parameters
1.
Open the
LACP Parameters
page.
2.
Complete the fields as needed.
3.
Click
Apply Changes
.
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1.
Open the
LACP Parameters
page.
2.
Click
Show All
.
The
LACP Parameters Table
displays.
Figure 7-69. LACP Parameters Table
3.
Use the
Unit
drop-down menu to view the
LACP Parameters Table
for other units in the stack, if they
exist.