Dell - page 222

222 Configuring System Information
3. Define the relevant fields.
4. Click Apply Changes .
The SNMP view is added, and the device is updated.
Displaying the View Table
1. Open the SNMP View Settings p age .
2. Click Show All .
The
View Tab le page displays:
Figure 6-88. View Table
Removing SNMP Views
1. Open the SNMP View Settings p age .
2. Click Show All .
The
View Tab le page displays.
3. Select an SNMP view.
4. Check the Remove check box.
5. Click Apply Changes .
The SNMP view is removed, and the device is updated.
Defining SNMP Views Using CLI Commands
For information about the CLI commands that perform this function, see the SNMP Commands chapter
in the
CLI Reference Guide . The following table summarizes the equivalent CLI commands you use to
define SNMP views.