Dell - page 335

Configuring Switching Information 335
Figure 7-31. Flow Based Mirroring
The Flow Based Mirroring page contains the following fields:
• Policy Name — Selects policy to associate with a traffic class. Policy Name is defined using the
DiffServ "Policy Configuration" web page.
•
Member Classes — Selects the traffic class associated with this policy. Member Class is defined using
the DiffServ "Class Configuration" web page.
•
Copy to Interface — When checked, this feature permits packets to be copied to either a unit/port or
LAG.
Mirroring to a Destination Port
1. Open the Flow Based Mirroring page.
2. Specify Policy Name and Member Class , and select the destination unit and port to be affected in
Copy to Interface .
3. Click Apply Changes .
The flow-based mirroring details are copied to the specified port, and the device is updated.
Configuring Flow-based Mirroring Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide :
• QOS Commands
The following table summarizes the equivalent CLI commands for this feature.