310 ConfiguringSwitching Information
1.
Open the
MAC ACL Rule Configuration
page.
2.
Select the desired ACL from the
MAC ACL
drop-down menu.
3.
Select the desired rule from the
Rule ID
drop-down menu.
4.
Modify the remaining fields as needed.
5.
Click
Apply Changes
.
The MAC-based rule is modified, and the device is updated.
Adding a New Rule to a MAC-based ACL
1.
Open the
MAC ACL Rule Configuration
page.
2.
Select the desired ACL from the
MAC ACL
drop-down menu.
3.
Specify
Create New Rule
for
Rule ID
.
4.
Enter a new ID number.
5.
Define the remaining fields as needed.
6.
Click
Apply Changes
.
The new rule is assigned to the specified MAC-based ACL.
Removing a Rule From a MAC-based ACL
1.
Select an ACL.
2.
Select a rule from the
Rule ID
drop-down menu.
3.
Check the
Remove
check box.
4.
Click
Apply Changes
.
The MAC-based ACL is removed, and the device is updated.
Configuring MAC-based ACLs Rules Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• ACL Commands
The following table summarizes the equivalent CLI commands you use to define a MAC ACL.