264 Configuring System Information
OSPFv2 Trap Flags
The OSPFv2 Trap Flags page is used to specify which OSPFv2 traps you want to enable or disable.
When the condition identified by an active trap is encountered by the switch, a trap message is sent to
any enabled SNMP Trap Receivers, and a message is written to the trap log.
To access the OSPFv2 Trap Flags page, click System
→
Trap Manager
→
OSPFv2 Trap Flags in the
navigation tree.
Table 6-59. Trap Flag Commands
CLI Command Description
snmp-server enable traps Enables SNMP traps globally or enables specific SNMP traps.
show trapflags Shows the status of the configurable SNMP traps.
show trapflags captive-portal Shows the status of captive portal trapflags.