Dell - page 729

Configuring IP Multicast 729
Figure 12-9. DVMRP Interface Configuration
The DVMRP Interface Configurat ion page contains the following fields:
• Interface — Select the interface for which data is to be configured. You must configure at least one
router interface before you configure a DVMRP interface.
•
Interface Mode — Select Enable or Disable from the drop-down menu to set the administrative mod e
of the selected DVMRP routing interface.
•
Interface Metric — Enter the DVMRP metric for the selected interface. This value is sent in DVMRP
messages as the cost to reach this network. Valid values are from 1 to 31.
Configuring a DVMRP Interface
1. Open the DVMRP Interface Configuration page.
2. Select the interface to configure from the Interface field.
3. Modify the remaining fields as needed.
4. Click Apply Changes .
The interface configuration is saved, and the device is updated.
Configuring a DVMRP Interface Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• DVMRP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-9. DVMRP Interface Commands
CLI Command Description
ip dvmrp metric Configures the metric for an interface.