Configuring Routing 581
Figure 9-38. Add Route - Default Route Type
3.
Next to
Route Type,
use the drop-down box to add a
Default
route or a
Static
route.
If you select Static, the page refreshes and new fields appear, as Figure9-39 shows.
Default
— Enter the default gateway address in the
Next Hop IP Address
field.
Static
— Enter values for
Network Address
,
Subnet Mask
,
Next Hop IP Address
, and
Preference
.
Figure 9-39. Route Entry Configuration - Add Static Route Type
4.
Click
Apply Changes
.
The new route is added, and you are redirected to the Configured Routes page.
Adding a Router Route Using CLI Commands
For information about the CLI command that per forms this function, see the following chapter in the
CLI Reference Guide:
• IP Routing Commands
The following table summarizes the equivalent CLI commands for this feature.