606 Configuring Routing
The Loopback ID field goes away, and the remaining loopback fields display.
Figure 9-56. Loopbacks Configuration - IPv4 Entry
5.
Enter
IPv4
in the
Protocol
field.
6.
Enter desired values in the remaining fields.
7.
Click
Submit
.
The new loopback is saved, and the webpage reappears showing secondary address configuration fields.
Figure 9-57. Loopback Configuration - Add Secondary Address
8.
Complete the
Secondary Address
,
Secondary IP Address
, and
Secondary Subnet Mask
fields.
9.
Click the
Add Secondary
button. The secondary address is saved, and the webpage reappears showing
the primary and secondary loopback addresses.