Configuring Switching Information 421
•
Included TLVs
— Selects TLV information to transmit. Choices include System Name, System
Capabilities, System Description, and Port Description.
Modifying the LLDP Configuration
1.
Open the
LLDP Configuration
page.
2.
Define the fields as needed.
3.
Click
Apply Changes
.
LLDP parameters are saved to the switch.
Displaying the LLDP Interface Settings Table
1.
Open the
LLDP Configuration
page.
2.
Click
Show All
.
The
LLDP Interface Settings Table
displays.
Figure 7-95. LLDP Interface Settings Table
3.
Use the
Unit
drop-down menu to view the
LLDP Interface Settings Table
for other units in the stack,
if they exist.
Copying LLDP Interface Settings
1.
Open the
LLDP Configuration
page.
2.
Click
Show All
.
The
LLDP Interface Settings Table
displays.
3.
Specify the Unit and Port you are copying from in
Copy Parameters From
.
4.
Click
Copy To
for each Unit/Port to receive these parameters.
5.
Click
Apply Changes
.
The LLDP Interface settings are copied, and the device is updated.