184 Configuring System Information
Figure 6-55. Add RADIUS Server
3.
Enter an IP address and name for the RADIUS server to add.
4.
Click
Apply Changes
.
The new RADIUS server is added, and the device is updated.
Viewing RADIUS Server Status and Removing a Named Server
1.
Open the
RADIUS Server Configuration
page.
2.
Click
Show All
.
The
RADIUS Named Server Status
page displays.
Figure 6-56. RADIUS Server Status
3.
To remove a named server, select the check box in the
Remove
column.
4.
Click
Apply Changes
.
The RADIUS server is removed from the list.
Configuring RADIUS Server Settings Using CLI Commands
For information about the CLI commands that perform thi s function, see the
RADIUS Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you
use.