764 Configuring IP Multicast
•
Interface
— Select the interface on which MLD proxy is enabled and for which data is to be displayed.
•
IPv6 Address
— The IPv6 address of the MLD Proxy interface.
•
Prefix Le ngth
— Displays the prefix length for the IPv6 address of the MLD Proxy interface.
•
Admin Mode
— The administrative status of MLD Proxy on the selected interface.
•
Operational Mode
— The operational state of MLD Proxy interface.
•
Number of Multicast Groups
— The current number of multicast group entries for the MLD Proxy
interface in the cache table.
•
Vers ion
— The version of MLD configured on the MLD Proxy interface.
•
Unsolicited Report Interval
— The Unsolicited Report Interval in seconds is the time between
repetitions of a host's initial report of membership in a group.
•
Version 1 Querier Timeout
— The older MLD version 1 querier timeout value in
hours:minutes:seconds. The Older Version Querier Interval is the time-out for transitioning a host
back to MLD mode once an older version query is heard. When an older version query is received,
hosts set their Older Version Querier Present Timer to Older Version Querier Interval.
•
Proxy Star t Frequenc y
— The number of times the proxy was brought up.
Click Refresh to refresh the data on the screen with the present state of the data in the router.
Click Clear Statistics to clear the MLD Proxy Interface statistics and reset the counters to their original
values.
Displaying IPv6 MLD Proxy Summary Information Using CLI Commands
For information about the CLI command that per forms this function, see the following chapter in the
CLI Reference Guide:
• IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Interface Membership Information
The Interface Membership Information page lists each IP multicast group for which the MLD proxy
interface has received membership reports. To display this page, click IPv6 Multicast
→
MLD
→
Proxy
interface
→
Interface Membership Info in the navigation tree.
Table 12-29. IPv6 MLD Proxy Summary Command
CLI Command Description
show ipv6 mld-proxy Displays a summary of the host interface status parameters.