Dell - page 320

320 ConfiguringSwitching Information
Enabling Ingress Backpressure
1. Open the Ports Global Parameters page.
2. Select Enable from the drop-down menu in the Flow Control field.
3. Click Apply Changes .
4. Ingress backpressure is now enabled.
Configuring Flow Control Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide :
• Ethernet Configuration Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-11. Port Configuration Commands
CLI Command Description
flowcontrol Enables flow control.
show interfaces configuration Displays the configuration for all configured interfaces.