Configuring Routing 571
2.
Select the Configured Source to modify.
3.
Change values on this screen as needed.
4.
Click
Apply Changes
Specified changes are saved, and the device is updated.
Configuring RIP Route Redistribution using CLI Command
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• Routing Information Protocol (RIP) Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-28. RIP Route Redistribution Commands
CLI Command Description
redistribute Configures OSPF protocol to allow redistribution of routes from the
specified source protocol/routers.
distribute-list out Specifies the access list to filter routes received from the source
protocol.