686 Configuring Quality of Service
Figure 11-3. Add DiffServ Class
Enter a name for the class and select the protocol to use for class match criteria.
3.
Click
Apply Changes
.
The new class is added and the device is updated.
Adding a Class Configuration Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Class Criteria
Use the
Diffserv Class Criteria page to define the criteria to associate with a DiffServ class. As packets
are received, these DiffServ classes are used to prioritize packets.
To di sp la y t he
page, click Quality of Service
→
Differentiated Services
→
Class Criteria in the tree view.
Table 11-2. Class Configuration Commands
CLI Command Description
class-map Defines a new DiffServ class of type
match-all
,
match-any,
or
match-
access-group
. For now, only
match-all
is available in the CLI.
class-map rename Changes the name of a DiffServ class.