Dell - page 530

530 Configuring Routing
Interface Configuration
Use the OSPF Interface Configuration page to configure an OSPF interface.
To display the page, click Routing
→ OSPF → Interface Configuration in the tree view.
Figure 9-11. OSPF Interface Configuration
The OSPF Interface Configuration page contains the following fields:
• Interface — Select the interface for which data is to be displayed or configured from the drop-down
menu.
•
IP Address — Displays the address of the VLAN Interface.
•
Subnet Mask — Displays the subnet mask of the VLAN Interface.
•
OSPF Admin Mode — You may select Enable or Disable from the drop-down menu. The default
value is
Disable . You can configure OSPF parameters without enabling OSPF Admin Mode, but they
have no effect until Admin Mode is enabled. T he following information is displayed only if the Admin
Mode is enabled:
State , Designated Router, Backup Designated Router , Number of Link Events , LSA
Ack Interval
, and Metric Cost . For OSPF to be fully functional, you must enter a valid IP Address and
Subnet Mask through the IP Interface Configuration page.