Dell - page 490

490 Viewing Statistics and Remote Monitoring
• Description — Describes the user-defined event.
•
Event Type — Selects the event type. Possible values are:
–
Log — Event type is a log entry.
–
Trap — Event type is a trap.
–
Log and Trap — Event type is both a log entry and a trap.
–
None — There is no event.
•
Time — Displays the time when the event occurred.
•
Owner — Lists the switch or user that defined the event.
•
Remove — Removes the event from the Events Table when checked.
Adding an RMON Event
1. Open the RMON Event Control page.
2. Click Add .
The
Add an Event Entry page displays.
Figure 8-13. Add an Event Entry
3. Complete the fields on this page.
4. Click Apply Changes .
The
event is added to the RMON Event Table , and the device is updated.
Modifying an RMON Event
1. Open the RMON Event Control page.
2. Click Show All to display the Event Control Table page.
3. Select the Edit check box in for the event entry to change.
4. Modify the fields on the page as needed.
5. Click Apply Changes .