220 Configuring System Information
SNMP notifications are enabled, and the device is updated.
Enabling Authentication Trap
1.
Open the
Global Parameters
page
.
2.
Select
Enable
in the
Authentication trap
field.
3.
Click
Apply Changes
.
Authentication notifications are enabled, and the device is updated.
Enabling SNMP Notifications Using CLI Commands
For information about the CLI commands that perform this function, see the
SNMP Commands
chapter
in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you use to
enable SNMP notifications.
SNMP View Settings
Use this page to create views that define which features of the device are accessible, and which are
blocked. You can create a view that includes or excludes OIDs corresponding to interfaces.
Use the SNMP View Settings page to define SNMP views.
To di sp la y t he SNMP View Settings page, click System
→
SNMP
→
View Se ttin gs in the tree view.
Table 6-40. SNMP Notifications Commands
CLI Command Description
show snmp engineID Displays the SNMP engine ID.
show snmp engineid Displays the SNMP engine ID.
show trapflags Shows the status of the configurable SNMP traps.
snmp-server enable traps Enables SNMP traps globally or enables specific SNMP traps.
snmp-server engineID local Specifies the Simple Network Management Protocol (SNMP) engine
ID on the local switch.