Delta Electronics VFD-F Series manual 02-07

				VFD-F Series
Parameters	Functions	Settings	Factory	Customer
			Setting
02-07	Loss of ACI Signal	00: Decelerate to 0Hz	01
		01: E.F.
		02: Continue operation by the
		last frequency command
02-08	Start-up Display Selection	Bit0~1: 00 = F LED	00
		01 = H LED
		10 = U LED (special
		display)
		11 = Fwd / Rev
		Bit2: 0 = Fwd LED /
		1 = Rev LED
		Bit3~5: 000 = 1st 7-step
		001 = 2nd 7-step
		010 = 3rd 7-step
		011 = 4th 7-step
		100 = 5th 7-step
		Bit6~7: Reserved
02-09	Special Display	00: A displays output current of	00
		AC drive
		01: U displays DC-Bus voltage
		of AC drive
		02: E displays RMS of output
		voltage
		03: P displays feedback Signal
		04: PLC display auto procedure
		state
02-10	User Defined Coefficient	0.01~160.00	1.00
02-11	Flying Start	00: Disable	00
		01: Enable (Dc brake disabled)
02-12	Flying Start Frequency	00: Trace from master	00
		frequency command
		01: Trace from maximum
		setting frequency 01-00
02-13	Master Frequency Memory	00: Do not remember the last	01
	Setting	known frequency
		01: Remember the last known
		frequency

8

DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 8-5