Delta Electronics VFD-F Series Description of the Digital Keypad KPF-CC01, Display Message

VFD-F Series

4.2 KPF-CC01

For models of VFD-F (HVAC) series

VFD007F43H; VFD015F43H; VFD022F43H; VFD037F43H; VFD055F43H; VFD075F43H; VFD110F43H; VFD150F43H; VFD185F43H; VFD220F43H; VFD300F43H; VFD370F43H; VFD450F43H; VFD550F43H; VFD750F43H; VFD900F43H; VFD1100F43H; VFD1320F43H; VFD1600F43H; VFD1850F43H; VFD2200F43H

NOTE

When KPF-CC01 is connected on AC motor drive, the communication protocol is forced to be 9600, 8, N, 2. After KPF-CC01 is disconnected, and AC motor drive immediately gets connection with other controller by RS-485, 1st communication fault may occur due to different communication protocol. AC motor drive will automatically reset communication protocol as previous parameter setting from 2nd communication.

4.2.1 Description of the Digital Keypad KPF-CC01

4

JOG Operation key

Press this key to execute the JOG frequency operation.

Left key

Moves the cursor left.

UP and DOWN key

Set the parameter number and changes the numerical data, such as Master Frequency.

FWD/REV Direction key

Select FWD/REV operation

RUN key

Start AC drive operation.

LCD Display

Indicates frequency, voltage, current, user defined units, read, and save etc.

Model Number

Status Display

Display the driver's current status.

MODE

Change between different display mode.

Parameter Unit key

Switch the operation command source.

Right key

Moves the cursor right.

PROG/DATA

Used to enter programming parameters.

STOP/RESET

Stops AC drive operation or reset the drive after fault occurred.

4.2.2 Explanation of Display Message

Display Message Description

The AC motor drive Master Frequency Command.

The Actual Operation Frequency present at terminals U, V, W.

DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 4-5