Delta Electronics VFD-F Series manual Group 5 Multi-step Speed Frequency Parameters

VFD-F Series

5.6 Group 5: Multi-step Speed Frequency Parameters
			Factory Setting:	0.00
05 - 00	1st Step Speed Frequency
			Factory Setting:	0.00
05 - 01	2nd Step Speed Frequency
			Factory Setting:	0.00
05 - 02	3rd Step Speed Frequency
			Factory Setting:	0.00
05 - 03	4th Step Speed Frequency
			Factory Setting:	0.00
05 - 04	5th Step Speed Frequency
			Factory Setting:	0.00
05 - 05	6th Step Speed Frequency
			Factory Setting:	0.00
05 - 06	7th Step Speed Frequency
			Factory Setting:	0.00
05 - 07	8th Step Speed Frequency
			Factory Setting:	0.00
05 - 08	9th Step Speed Frequency
			Factory Setting:	0.00
05 - 09	10th Step Speed Frequency
			Factory Setting:	0.00
05 - 10	11th Step Speed Frequency
			Factory Setting:	0.00
05 - 11	12th Step Speed Frequency
			Factory Setting:	0.00
05 - 12	13th Step Speed Frequency
			Factory Setting:	0.00
05 - 13	14th Step Speed Frequency
			Factory Setting:	0.00
05 - 14	15th Step Speed Frequency
	Settings	0.00~120.00 Hz	Unit:	0.01

The Multi-Function Input Terminals (refer to Pr.04-00 to 04-07) are used to select one of the AC drive Multi-Step speeds. The speeds (frequencies) are determined by Pr.05-00 to 05-14 shown above.

05 - 15	PLC Mode		Factory Setting: 00
	Settings	00	Disable PLC operation
		01	Execute one program cycle
		02	Continuously execute program cycles
		03	Execute one program cycle step by step
		04	Continuously execute program cycles step by step

This parameter selects the mode of PLC operation for the AC drive. The AC drive will change speeds and directions according to the user’s desired programming.

5-24 DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED