Delta Electronics VFD-F Series manual 11 - 02 Multiple Motors Control Settings 01~04

Factory Setting: 00

VFD-F Series

Factory Setting: 01

11 - 02 Multiple Motors Control

Settings 01~04

When this parameter is set to multiple motors control, multi-function terminals 03-00 to 03-07 will automatically set to suitable value. Users need to connect output terminal correctly to circulative control as shown in following chart.

11-01			01					02
Circulative			Time Circulation				Fixed Amount Circulation
Control	01
11-02		02		03	04	01	02		03	04
motors	01
03-00		01		01	01	01	01		01	01
	Motor 1 runs	Motor 1 runs		Motor 1 runs	Motor 1 runs	Motor 1 runs	Motor 1 runs		Motor 1 runs	Motor 1 runs
	by AC drive.	by AC drive.		by AC drive.	by AC drive.	by AC drive.	by AC drive.		by AC drive.	by AC drive.
03-01	N/A	02		02	02	02	02		02	02
		Motor 2 runs		Motor 2 runs	Motor 2 runs	Motor 1 runs	Motor 1 runs		Motor 1 runs	Motor 1 runs
		by AC drive.		by AC drive.	by AC drive.	by	by		by	by
						commercial	commercial		commercial	commercial
	N/A					power.	power.		power.	power.
03-02		N/A		03	03	N/A	03		03	03
				Motor 3 runs	Motor 3 runs		Motor 2 runs		Motor 2 runs	Motor 2 runs
	N/A			by AC drive.	by AC drive.		by AC drive.		by AC drive.	by AC drive.
03-03		N/A		N/A	04	N/A	04		04	04
					Motor 4 runs		Motor 2 runs		Motor 2 runs	Motor 2 runs
					by AC drive.		by		by	by
							commercial		commercial	commercial
	N/A						power.		power.	power.
03-04		N/A		N/A	N/A	N/A	N/A		05	05
									Motor 3 runs	Motor 3 runs
	N/A								by AC drive.	by AC drive.
03-05		N/A		N/A	N/A	N/A	N/A		06	06
									Motor 3 runs	Motor 3 runs
									by	by
									commercial	commercial
	N/A								power.	power.
03-06		N/A		N/A	N/A	N/A	N/A		N/A	07
										Motor 4 runs
	N/A									by AC drive.
03-07		N/A		N/A	N/A	N/A	N/A		N/A	08
										Motor 4 runs
										by
										commercial
										power.

5

11 - 03 Time Circulation Time Setting

Settings 00~65500 MinUnit: 1 Min This parameter is to set running time of each motor (including acceleration time) when multiple motors are in time circulation mode (11-01=1). If this parameter is set to 00, time setting is disabled and run with a motor.

DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 5-67