Delta Electronics VFD-F Series manual Group 2 Digital Output/Input Parameter

VFD-F Series

Group 2 Digital Output/Input Parameter

Parameters	Functions	Settings	Factory	Customer
			Setting
02-00	Source of Frequency	00: via keypad	00
	Command	01: via analog input AVI
		02: via analog input ACI1
		03: via analog input ACI2
		04: via RS485 serial
		communication
		05: via External Reference
02-01	Source of Operation	00: Controlled by the digital	00
	Command	keypad
		01: Controlled by the external
		terminals, keypad STOP
		enabled.
		02: Controlled by external
		terminals, keypad STOP
		disabled.
		03: Controlled by the RS-485
		communication interface,
		keypad STOP enabled.
		04: Controlled by the RS-485
		communication interface,
		keypad STOP disabled.
02-02	Stop Method	00:Stop = ramp to stop, E.F.	00
		(External Fault) = coast to
		stop
		01:Stop = coast to stop, E.F. =
		coast to stop
		02:Stop = ramp to stop, E.F. =
		ramp to stop
		03:Stop = coast to stop, E.F. =
		ramp to stop
02-03	PWM Carrier Frequency	1~10HP: 4000~10000Hz	9000Hz
	Selections	15~30HP: 3000~9000Hz	6000Hz
		≧40HP: 2000~6000Hz	4000Hz
02-04	Forward/Reverse Enable	00: Forward enabled	00
		01: Reverse disabled
		02: Forward disabled
02-05	2-wire/3-wire Operation	00: 2-wire (#1), FWD/STOP,	00
	Control Modes	REV/STOP
		01: 2-wire (#2), RUN/STOP,
		REV/FWD
		02: 3-wire
02-06	Line Start Lockout	00: Disabled	01
		01: Enabled

8-4 DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED