Dialogic 6.2 manual Ipstrip -h -o outputbase filename, November 151

ipstrip

ipstrip

The ipstrip program removes the infopkt header from the G3 or speech data in a specified infopkt stream file and writes each page of the converted data to a file, g3data.30x. The first page of converted data is written to the file g3data.301, the second to the file g3data.302, the third to the file g3data.303, and so on until the entire infopkt stream file is converted. All speech data is placed in a single file.

This utility is typically used to convert:

„Received fax data previously converted to an infopkt stream file back to G3 format.

(See mkinfopk on page 153 for detailed information on how to create an infopkt stream file.)

„Speech data recorded using the BfvSpeechRecord function to a raw speech format.

The ipstrip program is found in the app.src directory.

Command Syntax

ipstrip [-h] [-o <output_base>] <filename>

Arguments
-h	Puts a 128-byte Brooktrout header at the
	beginning of each file. The addition of this
	header causes the utility to store the resolution
	and width of each page within the file.
-o <output_base>	Uses supplied output filename base to form
	filenames instead of “g3data”.
<filename>	Specifies the name of the infopkt stream file,
	consisting of packetized G3 or speech data, to
	convert to raw format.

November 2009 151