Dialogic 6.2 manual Making Call Transfers Using Active Redirection Japan, November 187

Making Call Transfers Using Active Redirection (Japan)

Making Call Transfers Using Active Redirection (Japan)

To transfer calls in Japan, use Active Redirection, a call transfer method that uses the central office or a PBX to transfer calls. Active redirecting is only available for T1 ISDN PRI and ISDN BRI.

To configure using the Brooktrout Configuration Tool (Windows® only):

„Set port’s Protocol Options to T1 ISDN or BRI.

„Set the network Protocol to JATE (Japan) INS-1500.

„Set the network Switch Type to Japan.

„Set the Transfer Variant to Jate ISDN.

„Set the country_code in BTCall Parameters to 0810. A list of country codes is in:

C:\Brooktrout\Boston\bfv.api\inc\ccode.h

Note: You must be in Advanced Mode in the Brooktrout Configuration

Tool to configure BTCall Parameters.

To configure using configuration files:

„Set the port configuration using the callctrl.cfg configuration file: port_config=t1_isdn

„Set the protocol using the callctrl.cfg configuration file: protocol=ntt

„Set the switch type using the callctrl.cfg configuration file: switch_type=ntt

„Set the transfer_variant using the callctrl.cfg configuration file:

transfer_Variant=ntt

For ISDN BRI with point-to-multipoint configuration, set: transfer_Variant=ntt_mp

„Set the country code using the btcall.cfg configuration file: country_code = 0810(Japan).

For more information on the Brooktrout Configuration Tool, refer to the chapter on using the configuration tool in the installation and configuration guide that came with your software.

November 2009 187