Dialogic 6.2 manual November 271

				General Information
		Table 13. Robbed Bit Signaling Timers (Continued)
Timer	Granularity		Definition	Default Value
glare_	10 ms		Glare Detection.	IISDN56_GLARE_TIMER_
detection_			Timer started at the beginning	DEFAULT (5)
timer			of outseizure that determines if	50 ms
			a wink start or delay dial was
			returned too quickly to be an
			acknowledgment of the
			outseizure, but should be treated
			as glare.
guard_	50 ms		Guard Interval Timer. Time	IISDN56_GUARD_TIMER_
interval_timer			after the circuit becomes idle	DEFAULT (20)
			before it is used for another	1 second
			outgoing call.
hookflash_	10 ms		Hookflash Timer. Duration of a	IISDN56_HOOKFLASH_TIMER_
timer			transmitted hook flash signal.	DEFAULT(80)
				800 ms
hooktimer_	10 ms		Normal Outgoing Release Filter.	IISDN56_ONHK_TIMER_
onhook_rls			Filter on receive signal bit	DEFAULT (50)
			detector or the amount of time it	500 ms
			must be idle before distant end
			releasing is assumed. This filter
			is in effect some time after
			answer (specified by modified
			outgoing release time) until
			completion of call.
hooktimer_	10 ms		Modified Incoming Release	IISDN56_MOD_ONHK_IN_
onhk_mod_in_			Filter.	TIMER_
rls			Filter on receive signal bit	DEFAULT (80)
				800 ms
			detector or the amount of time it
			must be idle before distant end
			releasing is assumed. This filter
			is in effect from inseizure until
			sometime after answer (specified
			by modified incoming release
			time).
hooktimer_	10 ms		Modified Outgoing Release	IISDN56_MOD_ONHK_OUT_
onhk_mod_			Filter. Filter on receive signal	TIMER_DEFAULT (80)
out_rls			bit detector or the amount of	800 ms
			time it must be idle before
			distant end releasing is
			assumed. This filter is in effect
			from answer until some time
			after answer (specified by
			modified outgoing release time).

November 2009 271