Dialogic 6.2 manual Transfer, Tones options, November 161

tones

tones

The tones program uses DTMF detection routines to detect and display incoming touchtones and DTMF generation and single frequency tone generation routines to produce touchtones and other tones.

Turn on the Bfv API debug program from the command line. The btcall.cfg file is the configuration file. The tones program is found in the app.src directory.

Command Syntax

tones [options]
Arguments
-c <num>	Call given number, else wait for ring.
-g	Get tones and display them.
-p	Play tones (0,1,2,3,4,5,6,7,8,9,*,#,A,B,C,D).
-u <unitnum>	Channel number.
-v	Turn on Bfv API debug mode.

Requires one -por -gargument.

transfer

The transfer program waits and accepts an incoming call from one caller (caller A). It then calls BfvLineTransfer() to transfer the call to another caller (caller C). During the transfer or while the transfer is occurring, the program can run in one of two modes, supervised and unsupervised. In supervised mode, the program does not complete the transfer until it receives a response from caller C. If the response is 1 (ACCEPT), transfer completes the transfer. If the response is 2 (REJECT), transfer cancels the call transfer. In unsupervised mode, transfer completes the call transfer right away.

The btcall.cfg file is the user configuration file and the file call_ctrl.cfg is the call control configuration file. The transfer program is found in the app.src directory.

November 2009 161