Dialogic 6.2 manual Waits for the detection of an incoming call

Developing a Fax Application

args_admin.config_file_name = "usrcnfig.cfg"; BfvLineReset(lp, &args_admin);

Resets the channel and sets the user-configured options in the user-defined configuration file usrcnfig.cfg.

BT_ZERO(args_infopkt); args_infopkt.fname = name; args_infopkt.fmode = "w";

ips = BfvInfopktOpen(&args_infopkt);

Opens the infopkt-formatted file, name, to store the received fax.

BT_ZERO(args_tel); args_tel.timeout = 0L; BfvLineWaitForCall(lp, &args_tel);

Waits for the detection of an incoming call.

BfvLineAnswer(lp, &args_tel);

Answers the phone line by going off-hook.

BT_ZERO(args_fax);

args_fax.local_id = "Id_string"; BfvFaxSetLocalId(lp,&args_fax);

Sets the local ID to transmit to the sending machine.

BT_ZERO(args_fax);

BfvFaxBeginReceive(lp, &args_fax);

Begins the Phase B handshaking procedure.

BfvFaxGetRemoteInfo(lp, &args_fax);

Waits for the remote to send its ID and capabilities.

Note: The previous phone call is terminated by the application if the remote fax's ID does not match the expected value.

BfvFaxWaitForTraining(lp, &args_fax);

Waits for the completion of the Phase B handshaking process.

BT_ZERO(args_fax); args_fax.r_ips = ips; BfvFaxReceivePages(lp,&args_fax);

Receives and writes the fax data to the infopkt stream file pointed to by ips.

BT_ZERO(args_infopkt); args_infopkt.ips = ips; BfvInfopktClose (&args_infopkt);

Closes the infopkt stream file after the file is sent.

November 2009 69