Dialogic 6.2 manual Mkinfopk -o outputfname -i inputfname Infopkttype arg, November 153

mkinfopk

mkinfopk

The mkinfopk program builds an infopkt stream file.

The mkinfopk program is found in the app.src directory.

Command Syntax

mkinfopk -o <output_fname> [-i <input_fname>]

{infopkt_type arg}...

Arguments
-o <output_fname>	The name of the output file.
-i <input_fname>	Infopkt type specifications are included in the
infopkt_type	file input_fname instead of the command line.
	The type of infopkt that follows.
arg	An argument value for the infopkt. Depending
	on the corresponding infopkt_type, arg is
	either a filename or a dummy value.

The type infopkt_type is indicated by one of the following:

Data type	ascii, g3, speech, and annot.
	For data and indirect infopkts, the required
	argument is a filename.
	The annot type infopkt accepts either an ASCII
	filename or the argument @. If you pass mkinfopk
	the argument @, mkinfopk prompts you to enter a
	text annotation.
Indirect type	indir[infopkt], indirascii, indirg3,
	indirtiff, indirspeech, indirdcx, and
	indirwave.
	Note: The word indir is an abbreviation for
	indirinfopkt.

November 2009 153