Dialogic 6.2 manual November 273

				General Information
		Table 13. Robbed Bit Signaling Timers (Continued)
Timer	Granularity		Definition	Default Value
hooktimer_	10 ms		Minimum Dial Pulse Break	IISDN56_MINBREAK_TIMER_
minbreak			Time.	DEFAULT (1)
			Shortest break region that is	1 ms
			counted as a dial pulse break
			region. Anything shorter should
			be ignored.
ign_insz_post_	10 ms		Ignore Inseize After Release	IISDN56_IGNINSZ_TIMER_
rls_timer			Timer.	DEFAULT (5)
			Time after the interface has	50 ms
			idled before Instant ISDN will
			allow an inseizure from the
			connected equipment.
ign_rls_post_	10 ms		Ignore Release After Answer	IISDN56_IGNRLS_TIMER_
ans_timer			Timer.	DEFAULT (5)
			Time after the call has been	50 ms
			answered before Instant ISDN
			will allow the connected
			equipment to try to tear down
			the call.
modified_in_	50 ms		Modified Incoming Release	IISDN56_MOD_INRLS_TIMER_
rls_timer			Timer.	DEFAULT (10)
			Timer started at answer that	500 ms
			determines when modified
			incoming release filter timing
			ends and normal incoming
			release filter timing begins.
modified_out_	50 ms		Modified Outgoing Release	IISDN56_MOD_OUTRLS_TIMER_
rls_timer			Timer.	DEFAULT (10)
			Timer started at answer that	500 ms
			determines when modified
			outgoing release filter timed
			ends, and normal outgoing
			release filter timing begins.
no_ringing_	50 ms		Interval between rings during	IISDN56_NO_RINGING_TIMER_
timer			the ring cycle on outbound calls	DEFAULT (80)
			(FXS Loop Start and FXS	4 seconds
			Ground Start calls only).

November 2009 273