Dialogic 6.2 manual Transferll, Examples, Transfer.exe -u 0 -m 1 -t bstdialcomplete w110

transferll

Examples

¾Assume that 110 is phone number of caller C.

1.Transfer using 1 B-channel and complete transfer at the state

BST_DIAL_COMPLETE:

transfer.exe -u 0 -m 1 -t bst_dial_complete w110

2.Transfer using 1 B-channel and complete transfer at the state

BST_ALERTING:

transfer.exe -u 0 -m 1 -t bst_alerting w110

3.Transfer using 2 B-channels and complete transfer at the state

BST_DIAL_COMPLETE:

transfer.exe -u 0 -m 2 -t bst_dial_complete w110

4.Transfer using 2 B-channels in supervised mode, and ACCEPT the transfer. Caller C presses 1 to accept the call:

transfer.exe -u 0 -m 2 -t bst_connected -s prompt_file.pkt w110

transferll

The transferll program performs the same function as transfer except that transfer uses high-level call control and transferll uses low-level call control.

If transfer capability is

LINE_XFER_TWO_CHAN_NEEDS_NAILUP (where the BfvCallSWConnect() function connects the two channels), the high level BfvLineTransfer() transfer function performs this switch connection automatically. However the low level BfvCallWaitTransferComplete() transfer function provides an option to choose the disable_auto_sw_connect field of the args_cc struct. If disable_auto_sw_connect is true, the application must perform the switch connection.

November 2009 163