Transferring Calls Using Release Link Trunk Transfer

Transferring Calls Using Release Link Trunk Transfer

Release Link Trunk is an explicit call transfer method for Nortel DMS-250 switches and is only available for Nortel switches.

The host application initiates the Release Link Trunk (RLT) action, but the call transfer is completed within the public switch network. Calls come into the network on two B-channels. Each channel maintains its call and both channels are busy. When the call finishes, the B-channels are torn down.

Using Bfv Applications

Set Release Link Trunk in your Bfv application using the

BfvLineTransfer argument:

args.lp_second_Channel

A zero (0) value transfers calls over a single channel, such as an analog line.

To configure using the Brooktrout Configuration Tool (Windows® only):

„Set each port’s Protocol Options to T1 ISDN.

„Set the Protocol to Northern Telecom NIS A211-1.

„Set the Switch Type to Northern Telecom DMS-250.

„Set the Transfer Variant to Release Link Trunk (DMS-100 or DMS-250).

„Set the country_code in BTCall Parameters to 0010 (US). Country codes are listed in:

C:\Brooktrout\Boston\bfv.api\inc\ccode.h

Note: You must be in Advanced Mode in the Brooktrout Configuration

Tool to configure BTCall Parameters.

To configure using configuration files:

„Set the port configuration using the callctrl.cfg configuration file: port_config=t1_isdn

„Set the protocol using the callctrl.cfg configuration file: protocol=nortel

November 2009

202

Page 202
Image 202
Dialogic 6.2 manual Transferring Calls Using Release Link Trunk Transfer, November 202