Dialogic 6.2 Timers Level 2 Parameters, Data Type Mnemonic Definition, Timers Level 3 Parameters

		Q.921/Q.931 Timers
	Table 15. Q.921 Timers (Level 2 Parameters) (Continued)
Data Type	Mnemonic	Definition
unsigned	n200	Maximum number of retransmissions. Default
short		value is 3.
unsigned	n201	Maximum number of octets in an I frame.
short		Currently the maximum is 240.
unsigned	n202	Maximum number of transmissions of a TEI
short		request message. Default value is 3.
unsigned	K	Maximum transmit window. Default value is 7;
short		maximum value is 127. BRI default is 1.
	Table 16. Q.931 Timers (Level 3 Parameters)
Data Type	Mnemonic	Definition
IISDN_Q931_ q931		Structure that includes changes to the Q.931 timer
TIMERS		values, if any. A value of 0xFFFF disables the
		timer. Setting a field to 0 causes the default to be
		used. Some timers have two possible default
		values depending on the connection type/variant
		used. For example, if the variant field value is
		IISDNvarCCITT in an L4L3mENABLE_
		PROTOCOL message, or the conn_type field
		contains an IISDNctCCITT value in an
		L4L3mENABLE_D_CHANNEL message, the
		CCITT default value below is used. For all other
		connection type or variant values, the standard
		default value is used.
unsigned	t302	Q.931 Overlap Receiving timer. Default value is
short		150 (15 seconds).
unsigned	t305	Q.931 Disconnect Request state timer. Default
short		value is 50 (5 seconds) and the ITU-T default value
		is 300 (30 seconds).
unsigned	t308	Q.931 Release Request state timer. Standard
short		default value is 50 (5 seconds) and the ITU-T
		default value is 40 (40 seconds).
unsigned	t313	Q.931 Connect Request state timer. Default value
short		is 50 (5 seconds) and the ITU-T default value is 40
		(4 seconds).
unsigned	t314	Q.931 Segment message time. Default value is 40
short		(4 seconds).
unsigned	t316	Q.931 Restart Request state timer. Default value is
short		1200 (120 seconds).

November 2009 333