Elite VRVD640G manual Frequently Asked Questions, Would like to create a new POI dur

Frequently Asked Questions

Q. I cannot find the blue(yellow when using night colors) arrow that would show my location. Navigation does not start.

A. Check the GPS status icon on the Main menu screen, any of the map screens or the GPS Data screen. Either the connec- tion to your GPS receiver is broken, or the GPS cannot determine your position. Re- connect your GPS, or move out of cover to get a position fix.

Q. The GPS is connected, sending val- id position data, yet I cannot see the blue(yellow when using night colors) ar- row that would show my position.

A. You should see a large semi-transpar- ent ‘Lock’ icon on the screen. Touch this to re-enable the Lock-to-Position feature that moves the map back to your actual loca- tion.

Q. The blue(yellow when using night col- ors) arrow shows my location, but I can- not see the route (green or red line), and no voice instructions are announced.

A. It is likely that you have no active route. Check the upper left corner of the Cock- pit screen if you can see the indication for the next turn or not. If this field is blank, you have no route planned, so you need to create one first. It is a common mistake to find a destination, show it on the map, but forget to touch the ‘Route To’ button in the Cursor menu to create the route. Be sure to follow these steps, or always plan your routes with the ‘Find & GO’ button that will ensure your route is calculated automati- cally as soon as the destination has been selected.

Q. I cannot see the Lock button on the screen, yet the map is not rotated dur- ing driving.

Look for a small, red ‘N’ letter on the com- pass icon or an airplane icon instead of it. It is likely that you had initiated the North- up map orientation or the Overview mode unintentionally. Touch this icon to revert to

Track-up mode with automatic map rota- tion.

Q.Creating a multi-point route I have tapped the ‘Route To’ button once for each destination but only the last one appears in the list, all previous points have disappeared.

The ‘Route To’ button is for starting a new route only. For a single route you touch this when the destination is selected. Multi- point routes can be created after you have established a single route. Add points to the single route by using the ‘Add Via’ and ‘Continue’ buttons. Applying ‘Route To’ again will delete the whole route. In your case only single routes existed before, so they were deleted without a warning mes- sage. If you already have a multi-point route, Cydle warns you before deleting the whole route.

Q.The speaker icon shows Cydle is not muted yet I hear no voice guidance. The muting available from both map screens is just a quick silencer that cancels the sound output. Voice guidance and key sounds need to be enabled and volume must be set at the Sound Settings screen.

Q.I enabled the speed warning as soon as I bought the product but I have just been fined for speeding because Cydle failed to warn me.

For an accurate speed warning the actual speed limits of each street and road must be present correctly on the map. This is a relatively new feature of digital maps, so it may not be available in some countries, and its accuracy still has much room for improvement (ask your local dealer for the details in your region). This feature can help you in several cases but it cannot be con- sidered as serious speed control. That is why it can be turned on and off separately from the reliable voice guidance.

Q.I would like to create a new POI dur-

60