Installation

DIN REAR-MOUNT (Method B)

Installation using the screw holes on both sides of the unit.

1. Screw holes on the side of the unit.

2. Screws. Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape of the screw holes in the bracket.

3. Vehicle’s Factory Mounting Bracket

4. Dashboard or Console

5. Hook (Remove this part)

NOTE: The mounting sleeve, outer trim ring, and the mounting strap are not used for this method of installation.

PARTS

Check All Included Parts

Open the VRVD640G box and remove all parts, then check all parts and compare them to the parts list in the user manual. For replacement parts contact VR3 Customer Service at customerservice@vr-3.com or call 1-800-445-1797.

2 Keys

1 Mounting Sleeve*

1 Sheet Metal Screw

1 Metal Support Strap

1 Mounting Bolt

1 Faceplate Case

1 1/8" Audio/Video Cable

1 AV Input Adaptor & Bracket*

1 Remote Control*

*=Not Shown

9

Page 9
Image 9
Elite VRVD640G manual DIN REAR-MOUNT Method B, Check All Included Parts